76
Comment: aozgp vtdsm
|
1336
|
Deletions are marked like this. | Additions are marked like this. |
Line 1: | Line 1: |
cxmvzebkj jqdbog vjrua ekpf wchqgnz zdwlghnak wclg ---- CategoryCategory |
Things I need to do (SimonHuggins suggested I make lists, let's see how it goes): * Netgear DG834G * Test OE built kernel. * Get writing to nvram working. * Add crypt program for initial setup. * Try wireless driver. * Get ppp on boot setup. * VLAN out WAN port. * Amstrad E3 * Get pbltool booting kernels without need to flash. * Try compiling up a recent 2.6 with OMAP support - should need minimal changes to at least get serial console output. * Perhaps just try an NFS root with existing 2.4 kernel? * JTAGfest * Build cable. * Linksys WMA11B * Phil's WRT54G * NTL STB (and serial console) * EPIA-M * Clean up boot output. * Reserve less memory for non used VGA? * ACPI auto power on. * Disable USB/other unused ports? * Fix up recent mknbi to work with LinuxBIOS? * Figure out why d-i sarge images don't work, but etch beta1 does (just newer kernel?) * Try other distros? fc4? * Zaurus * Clean up bluetooth setup (send patch to bluez re serial-cs?) * Play with gpe-bluetooth. * Try sound? * PPP stuff. * nstx. * [http://www.earth.li/projectpurple/progs/onak.html onak] * Verify keys (minimum of self sig; also against other known keys?) * Try to do gossip support? * Better docs. * Cope better with multiple accesses. |
Things I need to do (SimonHuggins suggested I make lists, let's see how it goes):
- Netgear DG834G
- Test OE built kernel.
- Get writing to nvram working.
- Add crypt program for initial setup.
- Try wireless driver.
- Get ppp on boot setup.
- VLAN out WAN port.
- Amstrad E3
- Get pbltool booting kernels without need to flash.
- Try compiling up a recent 2.6 with OMAP support - should need minimal changes to at least get serial console output.
- Perhaps just try an NFS root with existing 2.4 kernel?
- JTAGfest
- Build cable.
- Linksys WMA11B
- Phil's WRT54G
- NTL STB (and serial console)
- EPIA-M
- Clean up boot output.
- Reserve less memory for non used VGA?
- ACPI auto power on.
- Disable USB/other unused ports?
- Fix up recent mknbi to work with LinuxBIOS?
- Figure out why d-i sarge images don't work, but etch beta1 does (just newer kernel?)
- Try other distros? fc4?
- Zaurus
- Clean up bluetooth setup (send patch to bluez re serial-cs?)
- Play with gpe-bluetooth.
- Try sound?
- PPP stuff.
- nstx.
[http://www.earth.li/projectpurple/progs/onak.html onak]
- Verify keys (minimum of self sig; also against other known keys?)
- Try to do gossip support?
- Better docs.
- Cope better with multiple accesses.