The 2.6.18-omap1 kernel (see http://www.muru.com/linux/omap/ or http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=summary) has support for the following devices:
- LCD framebuffer
- LEDs
- Matrix keypad (The one on top of the E3)
- NAND
- USB host
Work is still ongoing on the following. Possibly it needs cleaned up for inclusion in mainline, or we may not have got anywhere with it yet. Version is the first version we supported the feature in.
Please update this if you are working on any of it, so we don't duplicate work.
What |
Status |
Version |
Who |
Comments |
u-boot |
Working |
1.1.4 |
Mark Underwood |
Git tree patch submitted for comments; reply obtained and some more cleanup needed |
Modem |
Working |
2.6.15-omap1-e3 |
JonathanMcDowell |
As modem/speakerphone; should be included soon enough |
Handset |
Half working |
|
|
Working for voice calls over the modem (full duplex) but not with the ALSA driver. See this "Mailing List Entry" |
Sound |
Working |
|
Mark Underwood |
Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough - madplay works fine though. Needs mixer support. |
Mailboard |
Working |
2.6.16-omap2 |
Matt Callow |
Driver is working, but keymap needs doing |
Camera |
Working |
2.6.16-omap2 |
Matt Callow |
V4L2 Driver is working, but still needs some work clock calculations and pixel formats |
OPIE |
Working |
1.2 (snapshot 23/3/2006) |
David Ford |
Works fine, Currently requires an external mouse |
GPE |
Working ? |
?? |
|
|
DSP |
Waiting for hardware |
?? |
Jas Strong |
I have some Linux code for this which I will work on getting going when my E3 arrives. |