Things I need to do (SimonHuggins suggested I make lists, let's see how it goes):
- Netgear DG834G
- Test OE built kernel.
- Get writing to nvram working.
- Add crypt program for initial setup.
- Try wireless driver.
- Get ppp on boot setup.
- VLAN out WAN port.
- Amstrad E3
- Get pbltool booting kernels without need to flash.
- Try compiling up a recent 2.6 with OMAP support - should need minimal changes to at least get serial console output.
- Perhaps just try an NFS root with existing 2.4 kernel?
- JTAGfest
- Build cable.
- Linksys WMA11B
- Phil's WRT54G
- NTL STB (and serial console)
- EPIA-M
- Clean up boot output.
- Reserve less memory for non used VGA?
- ACPI auto power on.
- Disable USB/other unused ports?
- Fix up recent mknbi to work with LinuxBIOS?
- Figure out why d-i sarge images don't work, but etch beta1 does (just newer kernel?)
- Try other distros? fc4?
- Zaurus
- Clean up bluetooth setup (send patch to bluez re serial-cs?)
- Play with gpe-bluetooth.
- Try sound?
- PPP stuff.
- nstx.
[http://www.earth.li/projectpurple/progs/onak.html onak]
- Verify keys (minimum of self sig; also against other known keys?)
- Try to do gossip support?
- Better docs.
- Cope better with multiple accesses.