|
Size: 751
Comment:
|
← Revision 8 as of 2008-02-19 15:39:12 ⇥
Size: 821
Comment: converted to 1.6 markup
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| The E3 consists of a Texas Instruments OMAP5910 processor, some RAM, some NOR Flash, some NAND flash, a fixed-line modem and codec, a little camera and an STN colour display, a smartcard slot and a PS/2 keyboard. There's also a keypad matrix and some LEDs. | The E3 consists of a Texas Instruments OMAP5910 processor, 32M RAM, 128KB NOR Flash, 32MB NAND flash, a fixed-line modem and codec, a little camera and an STN colour display, a smartcard slot, a USB port and a PS/2 keyboard. There's also a keypad matrix and some LEDs. |
| Line 5: | Line 5: |
| There are closeup pictures of the main board (front and back) here http://mcallow.pwp.blueyonder.co.uk/e3 | There are closeup pictures of the main board (front and back) here http://mcallow.pwp.blueyonder.co.uk/e3 (bad link) |
| Line 8: | Line 8: |
| * The modem appears to be a standard v92 serial type modem | * The modem appears to be a controller-based Conexant V.90 modem. It appears as a standard UART to Linux. |
This page is intended to collect random bits of information about the E3's hardware so that people don't have to keep asking.
The E3 consists of a Texas Instruments OMAP5910 processor, 32M RAM, 128KB NOR Flash, 32MB NAND flash, a fixed-line modem and codec, a little camera and an STN colour display, a smartcard slot, a USB port and a PS/2 keyboard. There's also a keypad matrix and some LEDs.
There are closeup pictures of the main board (front and back) here http://mcallow.pwp.blueyonder.co.uk/e3 (bad link)
- The smartcard controller is a TDA8024
- The modem appears to be a controller-based Conexant V.90 modem. It appears as a standard UART to Linux.
The NAND flash is a Toshiba TC58DVM82A1FT00 and is compatible with SmartMedia
- The NOR flash is an Atmel AT49LV1025 and is not CFI compatible