Diff for "E3_Status" - the.earth's UK Tech wiki

Differences between revisions 15 and 27 (spanning 12 versions)

The 2.6.18-omap1 kernel (see http://www.muru.com/linux/omap/ or http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=summary) has support for the following devices:

LCD framebuffer
LEDs
Matrix keypad (The one on top of the E3)
NAND
USB host

Work is still ongoing on the following. Possibly it needs cleaned up for inclusion in mainline, or we may not have got anywhere with it yet. Version is the first version we supported the feature in.
Please update this if you are working on any of it, so we don't duplicate work.

What	Status	Version	Who	Comments
u-boot	Working	1.1.4	Mark Underwood JonathanMcDowell	Git tree patch submitted for comments; reply obtained and some more cleanup needed
Modem	Working	2.6.15-omap1-e3	JonathanMcDowell Matt Callow	As modem/speakerphone; should be included soon enough
Handset	Half working			Working for voice calls over the modem (full duplex) but not with the ALSA driver. See this "Mailing List Entry"
Sound	Working		Mark Underwood	Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough - madplay works fine though. Needs mixer support.
Mailboard	Working	2.6.16-omap2	Matt Callow	Driver is working, but keymap needs doing
Camera	Working	2.6.16-omap2	Matt Callow	V4L2 Driver is working, but still needs some work clock calculations and pixel formats Sensor is an OmniVision OV6650
OPIE	Working	1.2 (snapshot 23/3/2006)	David Ford	Works fine, Currently requires an external mouse
GPE	Working ?	??
DSP	Waiting for hardware	??	Jas Strong	I have some Linux code for this which I will work on getting going when my E3 arrives.

-  ⇤ ← Revision 15 as of 2006-04-29 16:59:28 → 
  Size: 2397
  Editor: 217-162-176-175
  Comment:
+   ← Revision 27 as of 2008-02-19 15:39:19 → ⇥
  Size: 2181
  Editor: localhost
  Comment: converted to 1.6 markup
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Here you can see what works, what doesn't and who is working on what. ''Version'' is the first version we supported the feature in.
[[BR]]Please update this if you are working on any of it, so we don't duplicate work.
+The 2.6.18-omap1 kernel (see http://www.muru.com/linux/omap/ or http://source.mvista.com/git/gitweb.cgi?p=linux-omap-2.6.git;a=summary) has support for the following devices:

 * LCD framebuffer
 * LEDs
 * Matrix keypad (The one on top of the E3)
 * NAND
 * USB host

Work is still ongoing on the following. Possibly it needs cleaned up for inclusion in mainline, or we may not have got anywhere with it yet.
''Version'' is the first version we supported the feature in. 
<<BR>>Please update this if you are working on any of it, so we don't duplicate work.
-Line 5:
+Line 14:
-||kernel               ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||2.6.16-omap1 onwards have base support     ||
||u-boot               ||Working        ||1.1.4          ||Mark Underwood ||Need to get PBL loading it from NAND       ||
||LCD                  ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||Needs Mark's 444 patch too.                ||
||Matrix keypad        ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||Keymap to be finalised. See ["E3 Keymaps"] ||
||USB                  ||Working        ||2.6.15-omap1-e3||                ||2.6.16-omap2 supports it by default        ||
||NAND                 ||Working?       ||2.6.15-omap1-e3||JonathanMcDowell||Is it possible to boot from NAND?          ||
||Modem                ||Working        ||2.6.15-omap1-e3||JonathanMcDowell[[BR]]Matt Callow||As modem/speakerphone     ||
||Handset              ||Not working    ||               ||                ||How do we switch the codec input/output to the handset? ''Has been done with AT commands to modem.''||
||Sound                ||Working ||               ||Mark Underwood  || Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough||
+||u-boot               ||Working        ||1.1.4          ||Mark Underwood<<BR>>JonathanMcDowell ||Git tree patch submitted for comments; reply obtained and some more cleanup needed ||
||Modem                ||Working        ||2.6.15-omap1-e3||JonathanMcDowell<<BR>>Matt Callow||As modem/speakerphone; should be included soon enough ||
||Handset              ||Half working   ||               ||                ||Working for voice calls over the modem (full duplex) but not with the ALSA driver. See this [[http://www.earth.li/pipermail/e3-hacking/2006-August/000572.html|"Mailing List Entry"]]||
||Sound                ||Working ||               ||Mark Underwood  || Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough - madplay works fine though. Needs mixer support. ||
-Line 15:
+Line 19:
-||Camera               ||Started        ||               ||Matt Callow     ||V4L2 driver in progress. I think the sensor is an OmniVision ov6650, but I can't find a datasheet for it||
||LEDs                 ||Working        ||2.6.17-rc2     ||JonathanMcDowell||I have a working driver using the LED class for this and will submit soon hopefully||
||OPIE                 ||Working        ||1.2 (snapshot 23/3/2006) ||David Ford ||Works fine, although top keyboard is not currently working with Opie. ||
+||Camera               ||Working        ||2.6.16-omap2   ||Matt Callow     ||V4L2 Driver is working, but still needs some work clock calculations and pixel formats<<BR>>Sensor is an OmniVision OV6650||
||OPIE                 ||Working        ||1.2 (snapshot 23/3/2006) ||David Ford ||Works fine, Currently requires an external mouse ||