Diff for "E3_Status" - the.earth's UK Tech wiki

Differences between revisions 3 and 19 (spanning 16 versions)

Here you can see what works, what doesn't and who is working on what. Version is the first version we supported the feature in. BRPlease update this if you are working on any of it, so we don't duplicate work.

What	Status	Version	Who	Comments
kernel	Working	2.6.15-omap1-e3	JonathanMcDowell	2.6.16-omap1 onwards have base support
u-boot	Working	1.1.4	Mark UnderwoodBR JonathanMcDowell	Git tree patch submitted for comments
LCD	Working	2.6.15-omap1-e3	JonathanMcDowell	Needs Mark's 444 patch too.
Matrix keypad	Working	2.6.15-omap1-e3	JonathanMcDowell	Keymap to be finalised. See ["E3 Keymaps"]
USB	Working	2.6.15-omap1-e3		2.6.16-omap2 supports it by default
NAND	Working	2.6.15-omap1-e3	JonathanMcDowell	Accepted by linux-mtd
Modem	Working	2.6.15-omap1-e3	JonathanMcDowell BRMatt Callow	As modem/speakerphone
Handset	Not working			How do we switch the codec input/output to the handset? Has been done with AT commands to modem, but only half duplex.
Sound	Working		Mark Underwood	Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough - madplay works fine though. Needs mixer support.
Mailboard	Working	2.6.16-omap2	Matt Callow	Driver is working, but keymap needs doing
Camera	Started		Matt Callow	V4L2 driver in progress. I think the sensor is an OmniVision ov6650, but I can't find a datasheet for it
LEDs	Working	2.6.17-rc2	JonathanMcDowell	In -mm tree.
OPIE	Working	1.2 (snapshot 23/3/2006)	David Ford	Works fine, Currently requires an external mouse
GPE	Working ?	??
DSP	Waiting for hardware	??	Jas Strong	I have some Linux code for this which I will work on getting going when my E3 arrives.

-  ⇤ ← Revision 3 as of 2006-04-06 20:55:15 → 
  Size: 1642
  Editor: JonathanMcDowell
  Comment: Update info about upstream kernel support.
+   ← Revision 19 as of 2006-06-14 15:30:34 → ⇥
  Size: 2395
  Editor: JonathanMcDowell
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-Here you can see what works, what doesn't and who is working on what.
+Here you can see what works, what doesn't and who is working on what. ''Version'' is the first version we supported the feature in.
 Line 4:
-||'''What'''           ||'''Status'''||'''Version'''  ||'''Who'''       ||'''Comments'''||
||kernel               ||Working     ||2.6.15-omap1-e3||                ||2.6.16-omap1 onwards have base support ||
||u-boot               ||Working     || ??            ||                ||Needs NAND support                     ||
||LCD                  ||Working     ||2.6.15-omap1-e3||                ||                                       ||
||Matrix keypad        ||Working     ||2.6.15-omap1-e3||                ||                                       ||
||USB                  ||Working     ||2.6.15-omap1-e3||                ||2.6.16-omap2 supports it by default    ||
||NAND                 ||Working?    ||2.6.15-omap1-e3||                ||Is it possible to boot from NAND?      ||
||Modem                ||Working     ||2.6.15-omap1-e3||JonathanMcDowell[[BR]]Matt Callow||As modem/speakerphone ||
||Handset              ||Not working ||               ||                ||How do we switch the codec input/output to the handset?||
||Sound                ||Not started ||               ||                || ||
||Mailboard            ||In Progress ||2.6.15-omap1-e3||Matt Callow     ||Needs a FIQ handler||
||Camera               ||Not started ||               || || ||
||OPIE                 ||Working     ||1.2 (snapshot 23/3/2006) ||David Ford ||Works fine, booting is fiddly until NAND is tidied ||
||GPE                  ||Working ?   || ??            || || ||
+||'''What'''           ||'''Status'''   ||'''Version'''  ||'''Who'''       ||'''Comments'''||
||kernel               ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||2.6.16-omap1 onwards have base support     ||
||u-boot               ||Working        ||1.1.4          ||Mark Underwood[[BR]]JonathanMcDowell ||Git tree patch submitted for comments ||
||LCD                  ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||Needs Mark's 444 patch too.                ||
||Matrix keypad        ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||Keymap to be finalised. See ["E3 Keymaps"] ||
||USB                  ||Working        ||2.6.15-omap1-e3||                ||2.6.16-omap2 supports it by default        ||
||NAND                 ||Working        ||2.6.15-omap1-e3||JonathanMcDowell||Accepted by linux-mtd                      ||
||Modem                ||Working        ||2.6.15-omap1-e3||JonathanMcDowell[[BR]]Matt Callow||As modem/speakerphone     ||
||Handset              ||Not working    ||               ||                ||How do we switch the codec input/output to the handset? ''Has been done with AT commands to modem, but only half duplex.''||
||Sound                ||Working ||               ||Mark Underwood  || Tested with rawrec/rawplay and mpg321 which can't seem to decode a 192KB MP3 quick enough - madplay works fine though. Needs mixer support. ||
||Mailboard            ||Working        ||2.6.16-omap2   ||Matt Callow     ||Driver is working, but keymap needs doing||
||Camera               ||Started        ||               ||Matt Callow     ||V4L2 driver in progress. I think the sensor is an OmniVision ov6650, but I can't find a datasheet for it||
||LEDs                 ||Working        ||2.6.17-rc2     ||JonathanMcDowell||In -mm tree.||
||OPIE                 ||Working        ||1.2 (snapshot 23/3/2006) ||David Ford ||Works fine, Currently requires an external mouse ||
||GPE                  ||Working ?      || ??            || || ||
||DSP                  ||Waiting for hardware      || ??            ||Jas Strong ||I have some Linux code for this which I will work on getting going when my E3 arrives. ||